|
|
New Product Releases 2007-2008
Kalki intends to
release the following product's or enhance it's existing product features as
given below in CY 2007, including Q1 of 2008. These new product enhancements are
aimed at providing expanding its offerings to the Energy Industry and complying
with the emerging standards.
|
|
Products
Services
Industries
Technologies
Request for Quotation
Resources
|
-
Kalki PDC (PMU Data
Concentrator)
Kalki's range of
PDC solutions at various network points in the Transmission Network shall be
released soon. This expandable and scalable solution enables the building of
a Super PDC at the Grid Control Center's as well as Intermediate PDC's at
various monitoring points within the grid and at different operator levels
to small PDC's at lower end's in the network. An integrated and scaleable
solution as proposed enable to make an initial investment and expand their
PDC capabilities as the data and communication requirements increase and
processing requirements increase as the PMU deployments increase.
-
Numerical Relay
Algorithm Source Code Library to be available soon
Kalki shall
release it's range of relay algorithm source code libraries soon. These
libraries shall enable relay manufacturers to buy proven algorithm's for the
various type of relay's tested under numerous test environments including
RTDS to be available for use in their Numerical Relays, reducing the heavy
cost in R&D and development of higher end Numerical Relays.
-
IEEE C37.118
Protocol Source Code Library
IEEE C37.118
Source Code Library and Implementation Services to enable OEMs to easily
deploy C37.118 based solutions to the market. Implementation and customer
protocol and software implementation as well as visualization tool
development solutions are also provided to customers.
-
KSGL Family to
support IEEE C37.118 Protocol
KSGL Family shall
support IEEE C37.118 PMU Protocol both up-stream and downstream and can act
as an intermediate level PDC at the sub-station level. This is in addition
to all the other protocols that is already supported. Interchanging
protocols from C37.118 to other sub-station protocols like IEC 61850 is also
possible.
-
Gateway Product's to be
certified for NERC/CIP
Kalki gateway
product's (patent pending) shall be certified for NERC/CIP
requirements this year. They already comply with NERC/CIP requirements but
are not been subject to certification tests.
-
Gateway Product's to
Support BACNet IP and CANOpen
Kalki gateway
product's shall support BACNet IP and CANOpen on it's interfaces making it
expand it's applications into Building Automation and Oil & Gas
applications.
-
Kalki Utility
Gateway Plus for Distribution Automation
The KUGP merges
the unique capability of KSGL with extended capability of Feeder RTU's to
bring you a highly versatile and communicable device for Distribution
Automation. KUGP provides I/O Capability, Direct CT/PT Support, Power
Quality Monitoring and Analysis Capabilities, Protocol Conversion
Capabilities, GPRS/GSM/PSTN/Radio communication support and support for IEC
60870-5, DNP3, Modbus and IEC 61850 Protocols. Click
Here for a detailed brochure
-
Kalki
Enterprise Optimization Platform
Kalki Enterprise
Optimization Platform is the ideal solution for Utility and Power Generation
customers to centralize and monitor their entire power network and optimize
generation, transmission and distribution costs and better utilize and
benefit from the Energy Trading regime.
-
Merit Order
/Economic Dispatch Software for Power Plants
The Merit Order
Dispatch or Economic Dispatch solutions are cost effective and scaleable
software ideal for Economic Dispatch executions in thermal power plants. Click
Here for a detailed brochure
-
Performance
Efficiency Calculation Software
The Performance
Efficiency Calculation Software for Boilers are solutions that implement
various IEEE standards on efficiency calculations. This solution is ideal for
online efficiency calculation and analysis. Click
Here for a detailed brochure
-
IED / RTU
Communication Test System with Support for IEC 61850, DNP3, IEC 60870-5-101,
IEC 60870-5-103 and IEC 60870-5-104
The IED/RTU
Communication Test Kit, is an ideal testing and validation system for power
system and protection engineers using IED's and RTU's with IEC 61850, IEC
60870-5-101,103,104 and DNP3 Protocols to ensure proper co-ordination between
protection/data acquisition function and communication function. This is very
useful both during product development, manufacturing and site validation
activities.
.If you would like to know more
please contact our Sales Team.
|
Substation
modernization with IEC 61850 using KSGL gateways. Read
On>>
IEC 61850
Client Implementation on Windows SCADA. Read
On>>
Latest News Releases @ Kalki Contact
KalkiTech Application Engineering Team to discuss how our offerings can help you. |