Spanish
English
Home > Products > SYNC - Communication Products > SYNC Asset Monitoring > SYNC 1000: Distribution Automation Monitoring Device
SYNC 1000 Series: Remote Monitoring Node For Distribution Automation
Kalkitech SYNC 1000 series of products are last mile field-rugged monitoring devices that has in-built IO modules and wireless modem as well as advanced substation automation protocols. SYNC 1000 combines the industry renowned performance of SYNC devices along with an outdoor ruggedness and security needed for Distribution Automation applications, all in a small form factor.
SYNC 1000 is ideal for Remote Monitoring of Distributed Assets like Distribution Transformers, Auto-reclosers and Sectionalizers as well for AMR/AMI and Industrial M2M applications. SYNC 1000 can also be used in monitoring and control of distributed energy resources (solar/wind), combining both meter reading as well as asset monitoring parameters on a single device.
With added capabilities of protocol conversion and low-scale data concentration, SYNC 1000 series of products reduces the need for multiple products and hence, reduces on installation, configuration and subsequent maintenance costs.
Related Products:
SYNC 2100: Intelligent Mini RTUs
SYNC 2000: Substation Rugged Protocol Gateways
SYNC 4000: Control Center Gateway
SCL Manager: Substation Engineering and Design Tool based on IEC 61850 (software)
With added capabilities of protocol conversion and low-scale data concentration, SYNC 1000 series of products reduces the need for multiple products and hence, reduces on installation, configuration and subsequent maintenance costs.
Related Products:
SYNC 2100: Intelligent Mini RTUs
SYNC 2000: Substation Rugged Protocol Gateways
SYNC 4000: Control Center Gateway
SCL Manager: Substation Engineering and Design Tool based on IEC 61850 (software)
Following are the key features:
- General
- Enabled with smartgrid protocols IEC 60870-101/104, DNP3.0, Modbus and IEC 61850
- Upto 5000 data point support
- Last 10000 event storage
- Multi master communication capability
- Inbuilt protocol conversion capabilities
- Local/Remote communication over serial and ethernet port
- Local/Remote operation
- Automatic startup and initialization following power restoration
- Time synchronization using IEC60870/DNP3/SNTP
- Transparent/tunneling support for remote configuration and disturbance collection
- Device management using SNMP/webserver
- Time stamping resolution of 1 millisecond
- Device and communication redundancy supported
- Robust
- IEC 61850-3 Compliant Hardware
- IP 65 as per IEC 60529
- Security
- Communication security using IEC 62351
- SSL based VPN with AES, DES or 3DES encryption over WAN/LAN
- NERC-CIP security compliant
- Reliability
- IEC 61850-3 compliant hardware
- Remote configuration and software update/FOTA
- Scalability and upgradability
- Inbuild and plug-in I/O support
- Custom card based on the requirement *
- Internal and external pluggable cellular modem (GPRS/EDGE/CDMA/UMTS)
- External pluggable RF modem
- Option for expanding communication port*
| SPECIFICATION SHEET | SYNC 1011 |
|---|---|
| GENERAL | |
| Management | Kalkitech EasyConnect Configuration utility/ Web Server/ SNMP & SSH Interface over Secure Network. FOTA support over GPRS/ EDGE/ CDMA |
| Maintenance | Direct over Debug port or Console port |
| System Protocols | TCP/ IP, UDP/IP, SMTP, POP, HTTP, FTP, SNMP, ICMP, DHCP, BOOTP, Telnet, DNS, ARP, PPPoE, DDNS |
| Application Protocol | IEC 60870-5-101/104, DNP3 serial/ TCP, Modbus RTU.TCP, DLMS, IEC 61850 and many more. Refer the full list of protocols at http://www.kalkitech.com/protocolsupport.htm |
| LED Indications | LAN Ready, Data Transfer, Serial Port RX/TX, Status, Power, IO Card Status |
| Security | NERC/ CIP Complaint, SSHv2 SSL based VPN tunnel using Blowfish/ AES/ 3DES |
| Logic Programming | Basic Logic Engine with AND/OR/NOT/Bit SHIFT/Split/Index support for digital and analog data Delay operations, Advanced logic based on IEC61131-3 |
| Certification | CE |
| Serial | |
| Ports | DB9-1 RS232, 1 RS232/485 Combicon-1 RS485 |
| Data Rate | 110bps-115.2kbps |
| Ethernet | |
| Ports | 1 RJ45 |
| Physical Layer | 10/100 Base-T auto sensing |
| Isolation | 1500VAC min as per IEEE802.3/ANSI X3.263 |
| I/O Interface | |
| Default Options | 8DI 24/48VDC, 6DO 2.5-5A |
| Expansion Cards | 1.4AI card, 4-20mA 1No. 2. 12 DI card, 24/48VDC 1 No. |
| Digital Input Isolation | 3KV optical |
| Digital Output Isolation | 3KV optical |
| Power Requirements | |
| Power Supply | 19-58 VDC |
| 85-264 VAC 50-60Hz | |
| 170-370 VDC | |
| Consumption Details | |
| Main Card | 5 Watt |
| Internal Modem | 8 Watt |
| 16 DI Card | 1 Watt |
| 16 DO Card | 1 Watt |
| 8AI Card | 1 Watt |
| 8DI, 6DO | 2 Watt |
| 8DI, 6DO, 4AI | 2 Watt |
| 12 DI | 1 Watt |
| Plug-in Modem | |
| Internal | GPRS/ EDGE/ CDMA upgradable to 3G, Internal Low power radio* |
| External | Radio modem, PSTN modem |
| Physical | |
| Dimensions (H X W X D) | 140mm X 240mm X 60mm |
| Weight | 800 grams |
| IP as per IEC60529 | IP65 |
| Environmental | |
| Operating Temperature | -10 to 70 °C |
| Storage Temperature | -20 to 80 °C |
| Relative Humidlity | 5% - 95% RH non condensing |
* Available on special request
The sample architecture of SYNC 1000:
